Menu
PG 64-16
| Type | PG 64-16 | |||
|---|---|---|---|---|
| Average 7-Day Maximum Pavement Design Temperature | < 64°C | |||
| Minimum Pavement Design Temperature | -16°C < | |||
| Test Title | Test Method | Test Result | ||
| Flash Point Temperature > 230°C | ASTM D92 | 318°C | ||
| Viscosity (135°C & Max 3 Pa.s) | ASTM D4402 | 0.34 | ||
| Solubility in Trichloroethylene % Minimun | ASTM D2042 INSO 2953 | 99.99 | ||
| Dynamic Shear (DSR) G*/sinδ Minimum 1 KPa Test Temperature | AASHTO T315 | 1.621 | ||
| Dynamic Shear (DSR) G*/sinδ Minimum 2.2 KPa Test Temperature , @10 rad/s (RTFOT Aged) | AASHTO T315 | 3.09 | ||
| Rolling Thin Film Oven Test (Mass Loss%) | ASTM D2872, AASHTO T240 | 0.039 | ||
| Pressure Aging Vessel (PAV) Temprature (°C): 100 | ||||
| Dynamic Shear (DSR) G*/sinδ Maximum 5000 kPa | AASHTO T315 | 5620 @16°C | ||
| Test on residue After PAV (100 °C) | ||||
| Bending Beam Rheometer(BBR) Creep stiffness S, Maximum 300 Mpa, @(-6°C) | ASTM D6648, T313 | 42.33 | ||
| Bending Beam Rheometer(BBR) M-Value Minimum 0.300 Test Temperature,@60s m @(-6°C) | ASTM D6648 | 0.4123 | ||